Coral Value, Price, and Jewelry Information

view gemstone encyclopedia

Coral carvings: South China Sea (red carving ~ 4 inch tall). Photo © Joel E. Arem, PhD, FGA. Used with permission.

Coral is the external skeleton of a tiny, plant-like marine animal called the coral polyp. The structures that result from generations of these creatures growing as colonies on top of each other can be quite massive. Since time immemorial, coral has been used for carvings, cabochons, and other jewelry pieces.

Coral Value

Start an IGS Membership today for full access to our price guide (updated monthly).


All Sizes
to /ct
Deep Pink
to /ct
Light Pink
to /ct
Accompanying value information:
View Coral Profile

The International Gem Society (IGS) has a list of businesses offering gemstone appraisal services.

Coral values are based on hue, saturation, size, cut, and polish.

Top values for calcareous coral go to red, pink, and orange pieces. Other colors are graded separately. Highest values for conchiolin coral go to black, then brown. Gold color has additional value, especially if it shows a sheen. When polished, the color may shimmer through a transparent layer.

Coral growths come in many shapes. The coral commonly used to make gems is branched and treelike. The largest sections of a coral’s trunk are used for carvings, which can be quite valuable. The determining value factors are the size and color of the piece as well as the skill of the artist.

koi fish carved from coral and rock

Koi fish carved from coral and rock, on display at the Taipei 101 tower, Taiwan. Photo by Brian Jeffery Beggerly. Licensed under CC By 2.0.

Most coral is cut into cabochons or made into a variety of shapes for use in necklaces as beads.

For more detailed information on coral quality factors, consult our precious coral buying guide.

From the Georgian through the early Victorian Era, corals were very popular jewelry stones. Blood coral bead in silver, detail from an antique French rosary cross. Photo by GorissenM. Licensed under CC By-SA 2.0.

Coral Information

Data Value
Name Coral
Heat Sensitivity Sensitive
Formula Calcareous coral, made primarily of calcite: CaCO3 Conchiolin coral, made primarily of conchiolin, an organic protein: C32H48N2O11
Etymology From the Greek korallion.
Colors White, pink, pale to deep rose red, salmon pink, red to dark red, blue (rarely), black. May be banded or zoned and show a cellular structure.
Fracture Splintery, uneven
Hardness 3.5-4
Cleavage None
Wearability Poor
Crystallography Hexagonal (R)
Refractive Index Calcite coral, 1.69 and 1.49, not usually measurable. Conchiolin (black coral) has RI of 1.56.
Birefringence 0.160
Dispersion None
Luminescence Pale violet or dull purplish red
Luminescence Present Yes
Luminescence Type Fluorescent
Absorption Spectrum Not diagnostic
Pleochroism None
Optics Uniaxial (-)
Optic Sign Uniaxial -
Luster Dull to vitreous
Polish Luster Waxy, dull, vitreous
Fracture Luster Dull
Specific Gravity 2.6-2.7. Note: Black coral, composed of conchiolin, is 1.34.
Enhancements Bleaching, dyeing, infusion/impregnation, surface coating.
Typical Treatments Bleaching, Dyeing, Infusion/Impregnation, Surface Coating
Transparency Semitransparent to opaque


beadwork necklace with red corals, marble stones, and gold pendant

This Nigerian bead work is called “Coral Highness,” since the necklace combines red corals, marble stones, and a gold pendant, and it’s also very suitable for a lady of royal lineage. Photo and description by Benita Nnachortam. Licensed under CC By-SA 4.0.


The gem use of coral began before recorded history. The Ancient Greeks, Romans, and Native Americans used red, pink, and white corals extensively. Deep red, bright pink, and clear white corals were highly prized. Inland cultures far from the undersea sources of coral would trade for these objects.

 tobacco pouch made from leather, silver, bronze, coral, and turquoises

Tibetan tobacco pouch made from leather, silver, bronze, coral, and turquoises. Photo by Vassil. Public Domain.

Although relative newcomers to the cultures of the Northern Hemisphere, black and gold coral have a long history of use as gem material in their native territories, primarily off the coasts of Hawaii and Cameroon. Akori corals from Cameroon were highly prized before the 18th century.

The rarest gem coral variety, Hawaiian gold coral is also harder than other varieties. It was first described scientifically in the 1970s. The harvesting of this gem material, however, is currently restricted and cost prohibitive due to environmental considerations.

The best red corals come from the Mediterranean. Italy works most of the Mediterranean corals, but Hong Kong also receives a great deal of this material for cutting. Conversely, Italy is also a major buyer of Taiwanese material.

China and Taiwan cut large quantities of white, pink, mottled, and ox-blood corals from the South China Sea.

“Sea Blossom Necklace"

“Sea blossom necklace,” pendant and clasp detail, Bali silver, coral coins, and bronze pearls. Photo by Christopher, Tania and Isabelle Luna. Licensed under CC By 2.0.

Coral Varieties and Identification

black coral

Black coral. Photo by Tsai ming lun. Licensed under CC By-SA 3.0.

There are two types of coral.

  • Calcareous corals: composed primarily of calcite and come in whites, reds, and pinks.
  • Conchiolin corals: composed of conchiolin, the same substance found in pearls and other shells, and come in black, brown, and gold colors.

The conchiolin type is tougher and less brittle than the calcareous type.

A close relative of conchiolin corals is the rare blue coral. The hues are very nice, but the saturation is low, so these pieces tend towards gray shades.

Calcareous corals have wavy, fibrous structure, cavities from polyps, and high spot birefringence.

Conchiolin corals have a concentric, circular growth pattern (“tree rings”) and show white crescents in cross sections of branches.


In the 1970s, Pierre Gilson developed “created corals” to help protect the natural variety from destructive harvesting. This imitation red and pink coral has a specific gravity (SG) of 2.44. This is always lower than natural red and pink material. This synthetic has weak birefringence and lacks natural structure. Under high magnification, you can see a fine granular texture.

Plastic imitations can be identified through hot point testing or acid testing. Only professionals should conduct these procedures.


Dyeing and bleaching are common treatments for coral.

Although dyeing can improve or even change a piece’s color, the new color may fade. This process can be identified by magnification or a solvent test. The addition of dyes may produce phosphorescence.

Bleaching produces gold coral from black. This is a stable treatment. This process can be identified by magnification (which reveals a different texture) and lower SG and refractive index values.


The Mediterranean and Red Sea areas are the principal producers of gem-quality coral. Although more commonly found in tropical regions, in shallow waters with a temperature from 13-16°C, coral reefs can also occur in colder, deeper waters, such as those found to the west of Ireland.

Other notable producers include the ocean waters off the following areas:

  • Australia; Cameroon; Hawaii; Japan; Malaysia; Mauritius; South Africa; Spain; Taiwan.

Coral jewelry, Mediterranean Sea (reddish beads around 5 mm in size). Photo © Joel E. Arem, PhD, FGA. Used with permission.

Coral Trade Restrictions

Corals are becoming rare. Their harvest is restricted in most parts of the world. Be aware that any raw material you are offered could be illegal to possess. To learn more about coral trade restrictions and protections for specific coral species, consult the websites of the U.S. Fish and Wildlife Service and the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES).

Coral polyps out at night

The corals used to make jewelry were once the exoskeletons and homes of living creatures, coral polyps, that come out at night. Photo by Derek Keats. Licensed under CC By 2.0.

Stone Sizes

Branches may be several inches to several feet long but aren’t always thick.

Coral Trade Names


  • Akori, from Cameroon
  • Algerian, low quality
  • African Star, from South Africa, red, pink, violet and yellow/orange
  • Angel skin, light pink
  • Arciscuro, darkest red
  • Bianco, white
  • Carbonetto, darkest red
  • Italian, good quality, white or pink
  • Japanese, pink with white center
  • Moro, high quality, light purplish red Japanese coral
  • Tosa, average quality Japanese coral
  • Ox blood, dark red
  • Pelle d’angelo, light pink
  • Rosa pallido, light pink
  • Rosa vivo, medium pink
  • Rosso, red
  • Rosso scuro, dark red
  • Salmon, light pink
  • Sardinian, high quality, very hard
  • Sicilian, low quality


  • Akori, blue
  • Black, black to dark brown
  • Blue, light to medium dark blue
  • Gold, yellow to brownish yellow, may have sheen
  • King’s, black


Corals are sensitive to heat and should be cleaned only with a damp cloth and dried carefully. Mechanical cleaning methods, such as ultrasonic, aren’t recommended. Consult our gemstone jewelry cleaning guide for more recommendations.

coral carvings

Coral carvings, Mediterranean Sea (each piece about 2 inches long). Photo © Joel E. Arem, PhD, FGA. Used with permission.

Ready to learn how to identify gems on your own?

Join our mailing list below to download a FREE gem ID checklist tutorial. See what’s inside…

• Discover the 17 practical steps to gemstone identification (even if you’re just getting started with gemology)

• Learn how you can use specific tools to gather data, make observations & arrive at an accurate ID

• Explore a range of gemological tests… not only will you get familiar with the process but also time-saving shortcuts!